All Velocity orders require a piece minimum, making group or agency purchases most ideal. Please contact us for details.
Scarab LT
PRODUCT DETAILS
The SCARAB™ LT features Velocity Systems patented swivel shoulder straps that were designed to alleviate common fit issues with traditional fixed angle shoulder straps (US Patent No. 9,894,962). The narrow ULTRAcomp™ shoulder straps articulate on a D-ring allowing them to sit correctly and comfortably on any user, regardless of neck thickness or shoulder broadness. The ULTRAcomp™ Shoulder Straps are adjustable for length and have a padded sleeve, that can also be used for cable routing. There is a color matching Velcro® Brand Loop Panel on the upper chest, a front expanded kangaroo pouch, and Integrated SwiftClip® buckles for rapid don/doff of auxiliary chest worn equipment such as Chest Rigs and SwiftClip® Placards. Color matching Velcro® Brand Loop on upper rear for Identification. The SCARAB™ LT also accepts Zip-On Back Panels. The SCARAB™ LT is sized to hold plates of corresponding sizes to the carrier, for example a size large carrier holds size large ESAPI Plates. All materials and workmanship are 100% made in the USA.
To increase the modularity of the SCARAB™ LT there are 3 cummerbund options! Three (3) Cummerbund Options: SCARAB™ Light Cummerbund, Low-Profile Elastic Cummerbund (CBN1) Molle, Plate Pocket Cummerbund (CBN3)
The Cummerbunds all have Velcro® Brand One-Wrap® fingers that slide inside the button holes on the rear of the SCARAB™ LT carrier and affix to the interior wall of the plate pocket. 1” of Multi-Layer Elastic is built into each cummerbund finger to give some stretch. Each finger can independently be let in or out of the plate bag to accommodate different body figures, and they can be angled for correct armor placement. ** All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.
Law Enforcement Plate Carrier (LEPC)
Product Details
The Mayflower RC by Velocity Systems Law Enforcement Plate Carrier (LEPC) was designed for ultimate modularity. The vest was designed with limited Molle and elastic cummerbunds for a sleek and clean look. The vest has large Velcro ® Brand loop blocks on the front and back for ID as well as a drag handle. The front kangaroo pouch that accepts our magazine inserts found on the LEPC was modeled after the APC. What makes this system modular is the optional removable front Molle flap that allows you to easily add the optional quarter flaps. The quarter flaps house both soft or hard armor and allow the end user to dawn/doff from that single point without having to lift the front flap. The modularity of the LEPC also allows the use of multiple Velocity Systems cummerbund options that can be used with any of the above configurations. All of our Swiftclip® placards work on all of the above mentioned configurations as well. The Law Enforcement Plate Carrier comes with the option of the Low-Profile Elastic Cummerbund (CBN1) (No Plate Pocket) and the Standard Molle, Plate Pocket Cummerbund (CBN3). The Standard Molle, Plate Pocket Cummerbund (CBN3) is designed to accept 6"x 6" hard armor plates or side soft armor inserts. The size small cummerbund has 5 complete columns of PALS. Size medium cummerbund has 6 complete columns of PALS. Size large cummerbund has 7 complete columns of PALS. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.
Low Vis Assault Carrier (LVAC)
Product Details
The Low Vis Assault Carrier (LVAC) is a Low-Visibility molle carrier that holds the Velocity Systems Ultra Low-Visibility (ULV) Plate Kit and/or the ULV Soft Armor Inserts. The carrier is made from 500 Denier Cordura and has integrated patent pending SwiftClip® attachment system buckles on the chest to instantly don/doff chest rigs and additional equipment. On the interior of the carrier there are elastic loops to route comm wires, and on the interior of the cummerbund there are elastic pouches to hold magazines or radios. The Low Vis Assault Carrier comes with the option of the Low-Profile Elastic Cummerbund (CBN1) (No Plate Pocket) and the Molle, Plate Pocket Cummerbund (CBN6). The Molle, Plate Pocket Cummerbund (CBN6) is designed to accept 6"x 6" hard armor plates or side soft armor inserts. The size small cummerbund has 5 complete columns of PALS. Size medium cummerbund has 6 complete columns of PALS. Size large cummerbund has 7 complete columns of PALS. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.
Scarab LE
Product Details
The SCARAB™ LE is made of 500 Denier Cordura with a mesh interior lining for increased breathability and features the same Velocity System patented swivel shoulder straps as the SCARAB™ Light (US Patent No. 9,894,962). The narrow ULTRAcomp™ shoulder straps articulate on a D-ring and can be adjusted to fit the operators preferred length allowing them to sit correctly and comfortably on any user, regardless of neck width or shoulder broadness. The shoulder straps come with padded sleeves that add comfort and can also be used for cable routing. All the hook and loop material used is color matching Velcro® Brand Fasteners.
​
The front lower half of the SCARAB™ LE has an integrated flat kangaroo pouch with a removable front flap and three rows of loop MOLLE webbing. The chest has an admin pouch with two rows of MOLLE webbing and Velocity Systems SwiftClip® Attachment System for rapid don/doff of auxiliary chest worn equipment (i.e. Chest Rigs & SwiftClip® Placards). The back of the SCARAB™ LE has a color matching loop panel and a drag handle at the top and four rows of MOLLE webbing at the bottom.
​
Front and rear hard armor plate pockets have adjustable internal plate suspension straps and a Velcro® Brand flap closer to secure the plates. The SCARAB™ LE is sized to hold SAPI plates of corresponding sizes to the carrier. All materials and workmanship are 100% made in the USA. To increase the modularity of the SCARAB™ Light there are 3 cummerbund options! Three (3) Cummerbund Options: SCARAB™ Light Cummerbund | Low-Profile Elastic Cummerbund (CBN1) | Molle, Plate Pocket Cummerbund (CBN3) - The quarter flap setup Is not included with the SCARAB™ LE, it is an optional accessory.
The Cummerbunds all have Velcro® Brand One-Wrap® fingers that slide inside the button holes on the rear of the SCARAB™ Light carrier and affix to the interior wall of the plate pocket. 1” of Multi-Layer Elastic is built into each cummerbund finger to give some stretch. Each finger can independently be let in or out of the plate bag to accommodate different body figures, and they can be angled for correct armor placement. ** All materials and workmanship are 100% made in the USA.
Assault Plate Carrier
Project Details
The Mayflower Assault Plate Carrier (APC) is designed to provide the wearer with a high degree of mobility while providing ample surface area for mounting mission essential pouches. The upper front of the APC contains an integral admin pouch with internal elastic loops to retain pens, pencils, chemlites or similar items. The front lower half of the APC has an integrated kangaroo pouch sized to hold up to three M4 sized magazines. The shoulder pads are made of a stretch woven material that allows enough elasticity to permit room for cable/hydration tube routing. The APC is available in two sizes; S/M and L/XL. The plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates. The S/M APC fits size small, medium and 10"x12" sized plates. The L/XL APC fits large and x-large plates. The APC comes with the option of the Low-Profile Elastic Cummerbund (CBN1) (No Plate Pocket) and the Standard MOLLE, Plate Pocket Cummerbund (CBN3). The Standard MOLLE, Plate Pocket Cummerbund (CBN3) is designed to accept 6"x 6" hard armor plates or side soft armor inserts. The size small cummerbund has 5 complete columns of PALS. Size medium cummerbund has 6 complete columns of PALS. Size large cummerbund has 7 complete columns of PALS. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.
EMS Plate Carrier
Project Details
The Mayflower RC By Velocity Systems EMS Plate Carrier (EMSPC) is a modified version of our Assault Plate Carrier (APC). The plate carrier was modified to include reflective strips and a navy-blue material often used by first responders. The carrier was designed to provide the wearer with a high degree of mobility while providing ample surface area for mounting mission essential pouches. The upper front of the EMS Plate Carrier (EMSPC) contains an integral admin pouch with internal elastic loops to retain pens, pencils, chemlites or similar items. The front lower half has an integrated kangaroo pouch sized to hold an assortment of medical or emergency supplies. The shoulder pads are 3D mesh for comfort and feature a VELCRO® Brand routing channel for cable and drinking tubes.
The EMS Plate Carrier (EMSPC) is available in two sizes; S/M and L/XL. The plate pockets are sized to accommodate Stand-Alone or ICW ESAPI or Swimmer cut plates. The S/M fits size small, medium and 10”x12” sized plates. The L/XL fits large and x-large plates. The EMS Plate Carrier comes with the option of the Low-Profile Elastic Cummerbund (CBN1) (No Plate Pocket) and the Standard MOLLE, Plate Pocket Cummerbund (CBN3). The Standard MOLLE, Plate Pocket Cummerbund (CBN3) is designed to accept 6″x 6″ hard armor plates or side soft armor inserts. The size small cummerbund has 5 complete columns of PALS. Size medium cummerbund has 6 complete columns of PALS. Size large cummerbund has 7 complete columns of PALS. All hook and loop material used is color matching Velcro® Brand Fasteners. All materials and workmanship are 100% made in the USA.